Raspberry Pi Zero Enclosure

|

Updated Thu Oct 29 2020

Raspberry Pi Zero enclosure made out of 5 mm plywood. All ports and pins are accessible. The led is visible from the outside and the chip has ventilation slots to reduce heat build up.

20 min

Intermediate

Electronics

Files Included (9)

Rpi0 case rounded 01-1.jpg
186 kB
Rpi0 case rounded 01-1.skp
2 MB

Rpi0 case rounded 01-2.jpg

381 kB

Rpi0 case rounded back 01.svg

4 kB

Rpi0 case rounded bottom 01.svg

7 kB

Rpi0 case rounded front 01.svg

10 kB

Rpi0 case rounded left 01.svg

4 kB

Rpi0 case rounded right 01.svg

5 kB

Rpi0 case rounded topA 01.svg

17 kB

Materials

5 mm plywood

Tools

3 mm bit

Instructions

Use a 3 mm bit to carve. Pocket depths are marked inside the svg files. Check the exploded 3d-image for assembly or use the Sketchup file. If you cut at 0 offset and use a soft plywood type the enclosure can be assembled without any glue. (CC-BY) these sides UP 2020 Creative Commons Attribution-ShareAlike