Shaper Workstation Large Shelf Created by Norman72 — Starting from the mid-size shelf from @samfromshaperhq I decided to make an extra large shelf for Shaper Workstation that also provides bench dog holes for using the Festool fixed clamps. Shelf support pins can go in the 5mm holes an act as reference points for consistent positioning.
The shelf position may move a small amount when loosened and repositioned, consistent indexing against pins should only be expected if shelf is not repositioned.
Starting from the mid-size shelf from @samfromshaperhq I decided to make an extra large shelf for Shaper Workstation that also provides bench dog holes for using the Festool fixed clamps. Shelf support pins can go in the 5mm holes an act as reference points for consistent positioning.
The shelf position may move a small amount when loosened and repositioned, consistent indexing against pins should only be expected if shelf is not repositioned.
-Shaper Origin
-Standard 3 mm cutter
-Standard 6 mm cutter
-Standard 8 mm cutter
(if you want to helix the 20 mm holes)
Cut all interior details first.
Shelf support holes 7 mm deep (helix)
Sholder on the mounting holes is designed to be cut to 13 mm deep
Comment or DM for Questions https://www.instagram.com/elhombreoscuro/