Synology MR2200 shelf
My Synology wireless router MS2200 needed to be out of the way, so I designed a shelf which is looking very simple. You can use "hiddden" fixture, so the plate which the rouster sits on, is less any support, shelf, what have you.
1
Electronics
Files Included (1)
MR2200.svg
2 kB
Materials
18 mm plywood, 9x22 cm, 2 screws.
Tools
Shaper Origin, dril.
Instructions
The hole for the MR2200 is milled. I used 6mm depth with a 6 mm in diameter router bit. As the lower part of the MR220 has rounded corners, the hole needs to be adjusted depending on the depth. In case of a 6 mm hole, use an offset of -2mm. The hole for ventilation and cables goes through the whole thickness of the plywood. I used a drilpres to dril the two holes for the screws. I used the screws sitting in situ in the shelf to mark the holes on the wall.