Bosch Colt Router Base Template

By Brian49 | Created January 8th, 2021 | Published January 9th, 2021 | Updated January 9th, 2021

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
Bosch Colt Router Base Plate

30 min

Easy

2

Category

Jigs & Fixtures

Files included (1)
NameSize
Bosch Colt Router Template.svg
3 kB

BY-NC-SA 4.0 License


Plate is made from 1/4" MDF. For my application I chose to make my base plate 5" x 7" but it could be made to whatever size is appropriate for your task
Shaper Origin 1/8" Bit (Supplied by Shaper)
The recessed shoulders for the screw heads are 3.4mm deep. Make sure that all cuts are inside the line. The holes closes to each edge were drilled and chamfered by hand and used to mount the plate to a sled that I made to flatten some lumber that I had.