Headphones Stand

By drzzzt | Created September 5th, 2020 | Published September 5th, 2020 | Updated September 6th, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
Simple Headphones Stand.

30 min

Easy

3

Category

Storage & Organization

Files included (1)
NameSize
headphone_stand.svg
11 kB

IKEA APTITLIG cutting boards or any other 12mm wooden board
SO 1/8" or 3mm spiral upcut router bit smaller than 4mm sanding paper wood oil
Actually straightforward. Cut, sand, put together and apply oil ;) Use any router bit smaller than 4mm (I used 1/8" / 3,175mm) or otherwise you won't be able to cut the dogbones (4mm). Contrary to the pictures, the SVG now has hidden dogbones for the arms.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license