Mortise and Tenon Joints (Imperial)
I have created mortise and tenon files for 1/2”, 3/8”, 5/16” and .001 over size 1/4” tenons. The size is in the file name.
14
Joinery
Files Included (44)
MT.251_.75.svg
717 BMT.251_1.25.svg
718 BMT.251_1.5.svg
714 BMT.251_1.75.svg
717 BMT.251_1.svg
714 BMT.251_2.25.svg
717 BMT.251_2.5.svg
714 BMT.251_2.75.svg
717 BMT.251_2.svg
714 BMT.251_3.25.svg
716 BMT.251_3.5.svg
715 BMT.312_1.25.svg
717 BMT.312_1.5.svg
715 BMT.312_1.75.svg
717 BMT.312_1.svg
715 BMT.312_2.25.svg
717 BMT.312_2.5.svg
714 BMT.312_2.75.svg
716 BMT.312_2.svg
716 BMT.312_3.25.svg
718 BMT.312_3.5.svg
713 BMT.312_3.svg
714 BMT.375_.75.svg
719 BMT.375_1.25.svg
719 BMT.375_1.5.svg
716 BMT.375_1.75.svg
719 BMT.375_1.svg
716 BMT.375_2.25.svg
719 BMT.375_2.5.svg
715 BMT.375_2.75.svg
719 BMT.375_2.svg
716 BMT.375_3.25.svg
719 BMT.375_3.5.svg
716 BMT.375_3.svg
716 BMT.5_1.25.svg
692 BMT.5_1.5.svg
686 BMT.5_1.75.svg
692 BMT.5_1.svg
686 BMT.5_2.25.svg
692 BMT.5_2.5.svg
685 BMT.5_2.75.svg
692 BMT.5_2.svg
686 BMT.5_3.25.svg
692 BMT.5_3.svg
686 B
Materials
Non-plywood
Tools
Shaper origin
1/4” 2 flute up cut router bit
Instructions
Locate the file on your intended tenon location, cut the outside of the profile. Locate the file on your intended mortise location, cut the inside of the profile. You will need to add a glue gap offset to either cut so your pieces will slip together and also have room for glue. I did not include pocket cuts around the profile due to the possibility of crashing the router bit into the workstation if the pocket cut was too large. You can just do offsets or create an on tool rectangle to suit your project.