Hook , Haken
Duplicating a hook with Trace. It was better to take a photo of the real object than to create the outline with a pen. A few nodes in the path are not perfect, but good enough.
10 min
Easy
14
Tools
Files Included (1)
hook1.svg
22 kB
Materials
Any kind of wood. Rest of plywood. 12mm
Tools
Trace, SO, Sandpaper
Instructions
Define outer contour and inner contour. Milling the inner ring first. Then the outer contour with a 0.1mm offset in a few steps. I took a 6mm cutter and 3x passes. The last one without an offset.