1/4 baltic birch plywood
black enamel paint
thin brush
Shaper Origin
Shaper Workstation (more comfortable but not necessary)
1/4 bit
1/32 bit
For both ornaments, do the engraving cuts first and then use the 1/4 inch bit to cut out. The 1/32 inch works wonderfully well, you can also use the 1/16 inch. Do an engrave depth at a lower speed. At some point you are going to have to change the cut type from pocket to internal or vice versa.
Use the black paint on the engraving, or not, your choice.
Happy christmas!