GECKO

By Robert113 | Created September 21st, 2020 | Published September 21st, 2020 | Updated September 21st, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
THIS IS AN INLAY WITHIN AN INLAY ADDED TO A SHELVING UNIT.

1 hr

Easy

9

Category

Furniture

Files included (1)
NameSize
LIZARD.svg
10 kB

1/2 INCH BALTIC BIRCH PLYWOOD 1/4 INCH THICK PURPLEHEART 1/4 INCH THICK CHECHIN
Shaper Origin, palm chisel, CA glue, random orbital sander.
I first used the SO to cut out the stripe from Chechin. Next, I laid out the gecko on purpleheart and created the groove for the chechin stripe. I installed the stripe and sanded it flush. Now I cut out the outline of the gecko inlay then routed the Baltic birch and installed the completed inlay.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license