Notch Shorty

By ODH | Created September 15th, 2020 | Published September 15th, 2020 | Updated September 15th, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
Short cruiser skateboard.

20 min

Easy

2

Category

Outdoors

Files included (1)
NameSize
notch shorty.svg
22 kB

Your choice of ply or suitable wood for the deck, trucks, wheels, bearings and griptape.
6mm/3mm cutter, I use a pattern router bit to cut out the shape after the cnc has done the outline, wheel notches and bolt holes (3MM cutter for this), then round over the edges with the router to finish, (im not responsible if you make a crappy board and it fails whilst skating, PLEASE BE RESPONSIBLE & SAFE)
Choose a maple ply, preferably at least seven ply or a SUITABLE! substitute (chipboard is not ok!) cut the bolt holes first then the wheel notches (cut ON the line to make sure they cut to the edge and then pocket), finish with the out line. I cut 10mm depth with the cnc then rough cut and pattern router the rest then round over to finish. Sand and add paint, decals, etc... then finish with a satin or matt varnish, don't use gloss varnish this isn't the deck of the QE2! then apply grip tape and trucks. x

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license