Clamping Square

By FlipFlopWoodworks | Created August 9th, 2020 | Published August 9th, 2020 | Updated August 9th, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
Simple clamping square to be used for assembly.

20 min

Easy

14

Category

Cabinetry

Files included (1)
NameSize
Assembly Square.svg
904 B

material of your choosing double sided tape
Shaper Origin 1/4 upcut
1. Select material of appropriate thick and size for the required dimensions 2. The SVG is for a 12" x 12" square, use on tool scaling for the desired size 3. Cut inside cutouts to full depth of the material (multiple passes) 4. Cut outside cut ensuring that there is sufficient Shaper tape for Origin to maintain an accurate cut.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license