Lollipop Clock

By Dennis42
|
BY-NC-SA 4.0 License
|
Updated Tue Nov 10 2020

This was taken from the "Woodworker's Journal" December 2020 - the project contains 14 ovals and was meant to be done on a gantry type CNC the magazine provided the ".tap" files for the CNC. I thought it was a great project to do on the Shaper. I created the ".SVG" file based on my interpretation of the magazines description.

30 min
Easy

4

Decor

Files Included (2)

  • Clock Instructions.pdf

    534 kB
  • CLOCK rev1.svg

    19 kB

Materials

Minimum 1" thick 7" x 9" Hardwood (I used Gummy Cherry and Walnut for the 2 clocks I made)

A Quartz Clock Movement - Source Rockler or https://meiselwoodhobby.com/ Make sure you order the correct shaft length for your thickness (I used a 7/8")

Don't forget to order hands

Clear Molding epoxy

Color pigment of your choice

Tools

5/16" drill bit

3" forstner bit or use shaper to cut 3" circular recess on back of face.

1/4" & 1/8" router bits

Instructions

See attached file


Made by Shaper Tools

© ShaperHub & Shaper Tools, Inc. all rights reserved