Darrell Peart and G&G'ish Inspired Desk
This desk was supposed to be a G&G inspired piece but after reading books by Darrell Peart and taking most of my inspiration from a dresser Darrell makes I have learned there is more Derral Peart in this desk than G&G. It's a fantastic desk that gets used daily for my own office. Discussion can be had on the forum. https://community.shapertools.com/t/darrell-peart-and-g-gish-inspired-desk/12181
43
Furniture
Files Included (105)
Back Center Bottom Rail.svg
685 BBack Center Panel.svg
777 BBack Center Stile.svg
645 BBack Center Top Rail.svg
778 BBottom Center Drawer.svg
862 BBottom Left pins_a.svg
2 kBBottom Left pins_b.svg
2 kBBottom Left tails_a.svg
3 kBBottom Left tails_b.svg
3 kBBottom Left Through pins_a.svg
2 kBBottom Left Through pins_b.svg
2 kBBottom Left Through tails.svg
2 kBBottom Left.svg
1 kBBottom Right pins_a .svg
2 kBBottom Right pins_b.svg
2 kBBottom Right tails_a.svg
3 kBBottom Right tails_b.svg
3 kBBottom Right Through pins_a.svg
2 kBBottom Right Through pins_b.svg
2 kBBottom Right Through tails.svg
2 kBBottom Right.svg
945 BCenter Divider.svg
1 kBCurved Leg.svg
911 BDivider.svg
1 kBDovetails
Drawer 1
Drawer 2
Drawer 3
Drawer 4
Drawer Pull H.svg
857 BDrawer Pull Post H.svg
950 BF Top Center Center Drawer .svg
820 BF Top Center Left Drawer.svg
769 BF Top Right Center Drawer.svg
751 BFront Bottom Rail.svg
1 kBFront Drawer Bottom Rail.svg
989 BG&G Desk.step
7 MBG&G Side Panel.svg
1 kBHB pins_a 3.svg
2 kBHB pins_b 3.svg
2 kBHB tails_a 3.svg
2 kBHB tails_b 3.svg
2 kBHutch
Left Divider.svg
1 kBLeft Drawer Middle.svg
1 kBLeft Drawer Top.svg
864 BLeft Side Back Bottom Rail.svg
898 BLeft Side Back Panel.svg
881 BLeft Side Back Top Rail.svg
877 BLeft Side Front Cloud Lift.svg
1 kBLeg H.svg
844 BMiddle Drawer.svg
840 BMiddle pins_a.svg
2 kBMiddle pins_b.svg
2 kBMiddle tails_a.svg
2 kBMiddle tails_b.svg
2 kBMiddle Through pins_a.svg
2 kBMiddle Through pins_b.svg
2 kBMiddle Through tails.svg
1 kBpins_a 2.svg
1 kBpins_a 2.svg
2 kBpins_a 2.svg
2 kBpins_a 2.svg
2 kBpins_b 2.svg
1 kBpins_b 2.svg
2 kBpins_b 2.svg
2 kBpins_b 2.svg
2 kBRight Divider.svg
1 kBRight Drawer Middle.svg
1 kBRight Drawer Top.svg
833 BRight Side Back Bottom Rail.svg
888 BRight Side Back Panel.svg
887 BRight Side Back Top Rail.svg
881 BRight Side Front Cloud Lift.svg
1 kBSide Center Stile.svg
729 BSide Panel Bottom Rail.svg
1 kBSide Panel Top Rail.svg
1 kBtails 2.svg
1 kBtails_a.svg
1 kBtails_a.svg
1 kBtails_a.svg
1 kBtails_b.svg
1 kBtails_b.svg
1 kBtails_b.svg
1 kBThrough pins_a 3 .svg
1 kBThrough pins_b 3 .svg
1 kBThrough tails 3.svg
1 kBTop Center .svg
1 kBTop Left.svg
862 BTop Middle Half Blind pins_a.svg
2 kBTop Middle Half Blind pins_b.svg
2 kBTop Middle Half Blind tails_a.svg
2 kBTop Middle Half Blind tails_b.svg
2 kBTop Middle Through pins_a.svg
1 kBTop Middle Through pins_b.svg
1 kBTop Middle Through tails.svg
1 kBTop pins_a.svg
2 kBTop pins_b.svg
2 kBTop Right.svg
887 BTop Side Through pins_a.svg
1 kBTop Side Through pins_b.svg
1 kBTop Side Through tails.svg
1 kBTop tails_a.svg
2 kBTop tails_b.svg
2 kBWide Handle 2.svg
1 kB
Materials
Varied materials but I used mostly African Mahogany.
The desk top is very deep @36" deep and 6' wide.
Tools
A full shop worth but almost every part of this desk has a curve of some sort and the origin was used to make templates for all of it.
Instructions
Even though all of the files are here at your disposal there is still going to be a lot of planning on your part. I do want to reiterate that this desk top is 36" X 6' so it's deep. The desk base is pretty deep as well. I can't give step by step instructions on this one, that's why I marked it advanced but I am available for any questions you might have along the way if needed.