Cutting Board with Star Inlay - First Project

By UgoBoy | Created June 4th, 2020 | Published June 4th, 2020 | Updated June 4th, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
Made a cutting board out of Walnut, Maple, Cherry all 1.5" thick. Cut out with the Table saw. I hand joined the glue edges and used the Domino. The Star Inlay was pocketed out .15" deep. I used 1/4" bit initially w/small Offset. Finished with 1/16" bit for the final cut. I use a shape chisel to get the tips of the stars sharp. I Filled the pocket with blue stone and Clear Epoxy. The board was finished with mineral oil and Bees wax.

Easy

3

Category

Furniture

Files included (1)
NameSize
star 5.svg
6 kB

2" thick Walnut, Maple and Cherry
Shaper Origin
None listed

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license