Coronavirus Trivet

By Baxter | Created April 17th, 2020 | Published April 19th, 2020 | Updated April 19th, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
If we've gotta stay locked inside our houses, at least we can put the little bastard to work for us.

10 min





Files included (1)
Coronavirus Trivet.svg
7 kB

1/4" plywood or any hardwood. Make sure it's thin.
Shaper Origin
Single cut. First with 1/4" plywood, but it seemed pretty cheap. Next, a glued-up pair of scrap hickory, planed to about .40". single cut. Be sure to use double-stick tape so the bits don't separate. I overdid it, and one of the little protein receptors broke off. As it turns out, this achieved what scientists all over the world have been trying to do. I'll be by my phone if they want help. Sand and spray with varethane.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license