COVID Box
Adaptation of the project https://www.covidbox.org for Shaper. The concept is to protect doctor from spray when performing spray intensive procedures (intubation). I changed design slightly to optimize for readily available 2'x4' sheets of 1/4" Polycarbonate.
2
Instruments
Files Included (2)
CutCovidA.svg
28 kBCutCovidB.svg
18 kB
Materials
2 x Polycarbonate Sheets (1/4" thick, 2' x 4')
19 x Cable Ties
2 x Machine Screws (1/2" Length, 1/4"-20)
Tools
Shaper Origin
1/4" Single Flute Upcut Bit
Instructions
Both files are meant to be anchored to bottom left corner of polycarbonate and then an outside cut where appropriate. I had to play with offsets to get the holes to cut out correctly. This could be improved in the .svgs or just something to be aware of when you are cutting. I cut in ~.06" depth increments. This was my first time using Shaper. Stay safe!