Hose Support / Schlauchhalter
By Martin12|BY-NC-SA 4.0 License|Updated May 25th, 2020
Support that can be used for convenient storage of compressed air hose in the workshop or garage, as well as for other hoses or cables
30 min
Easy
57
Files included (2)
12 mm birch plywood
wood glue
Shaper Origin
6 mm upcut bit
The complete design consists of the front part, one or more identical center parts and a base board.
Front and center parts may be scaled as required. The original size of the svgs and two center parts glued together fit well for my 5 meter long/ 12 mm diameter compressed air hose.
The base plate has a groove on the rear side to accomodate the supply hose from the compressor and is simply cut with the table saw. I should have made this with the SO as well...
Happy shaping!