Opensign Created by Peter38 — I needed an opensign for my business
The design was made in paint.net
I copied it to Inkscape and did a bitmaptrace there
Then the file was saved as a .svg
Happy cutting
I needed an opensign for my business
The design was made in paint.net
I copied it to Inkscape and did a bitmaptrace there
Then the file was saved as a .svg
Happy cutting
The decorboard from Ikea also has a stainless steel look on the backside
I cut it with the standard 3 mm routerbit
Autospeed was 250 plungespeed was 50
The material was cut in one pass with an offset of 0,5 mm
followed by a finalpass.