Puzzle box

By Roy_Merchier | Created July 23rd, 2020 | Published July 23rd, 2020 | Updated July 23rd, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
Oak puzzle box.

2 hr

Intermediate

9

Category

Decor

Files included (1)
NameSize
Puzzel_001_M.svg
4 kB

Oak, but any wood will do.
Shaper Origin Sanding paper ;-)
The cuts themselves are pretty straightforward, but due to the pocketing cuts and the fact that you need 4 pieces, it takes some time. the dept of the parts and the pocketing are of course free to choose. The SVG file as provided delivers a rather tight fit, so if you want to take the pieces apart a lot, you will need to do some sanding or adapt the SVG file. Doing a negative offset cut for the parts around the letters could do the trick, but I didn't try it. It was a gift to a colleague, and she was a bit emotional when receiving it, so I hope this means she likes it. Roy Belgium

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license