Workstation MFT

By Jens4 | Created October 11th, 2020 | Published October 11th, 2020 | Updated October 11th, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
Adds a MFT table to the Shaper Workstation with 420mm x 310mm with 48mm hole spacing (20mm).

Easy

5

Category

Shaper Workstation

Files included (1)
NameSize
MFT_Board_AD.svg
23 kB

19 mm MFT board 420mm x 310mm
Shaper Origin
Cut the MFT board and make small hole with 6mm cutter. For the dog holes 10mm or bigger to use helix mode. Additional 3D printed parts for this project are here: https://www.thingiverse.com/thing:4620786 Further instructions will follow.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license