Had a go on my own workstation with my new Shaper Origin. As this were my first cuts, there should be room for improvement.. ;-) On both sides the inserted screws allow the alignment of the workpiece under 90deg. As an additional feature I milled holes to allow alignment under different angles as well. The desk is adjustable in height and fixed with some M10 screws I already had. I will ad some improvements step by step and update this project.
35
Jigs & Fixtures
Backplate_Body_new.svg
Backplate-Sketch.svg
Desk_Support.svg
Desk-Back.svg
Desk-Top.svg
Knob_Labeling_new.svg
Knob.svg
Labeling_with_Boundary.svg
14mm coated MDF
4x aluminium profile 30x30mm, length 500mm
2x internal angle slot 8
T-slot nut M5
M5 x 16 pan head
3x: M10 x 30mm + nut
Shaper Origin
This version is inspired by www.beezleecreations.com and the new workstation from Shaper itself.
Made by Shaper Tools
© ShaperHub & Shaper Tools, Inc. all rights reserved