Balance Bike Created by Joli — I am a passionate designer who learned 3d modeling to make my own products for my family. Currently I have made my designs available to you as a woodworker.
There is a fun project waiting for you that will make your children happy and certainly gain respect from your friends and family. The plan is mainly based on providing the designs needed to saw the balance bike.
Find the plan here https://www.etsy.com/listing/660010258/
I am a passionate designer who learned 3d modeling to make my own products for my family. Currently I have made my designs available to you as a woodworker.
There is a fun project waiting for you that will make your children happy and certainly gain respect from your friends and family. The plan is mainly based on providing the designs needed to saw the balance bike.
Find the plan here https://www.etsy.com/listing/660010258/
Playwood:
310 x 100 x 3 mm
220 x 120 x 4 mm
400 x 650 x 21 mm
500 x 400 x 10 mm
Shaper Origin, drilling machine, sanding, drills
Saw the parts out
Check if everything fits well
Make the bolts and nuts to measure
Sand the parts
Paint or oil the parts
Put everything together
When setting up, a lot of pressure may be used with glue clamps to bend the frame the right way and run it flat along the center support. Only then tighten the nuts. If necessary, you can also soak the wood in water for a while.