Sliding Bevel

By NerdyTimber
|
BY-NC-SA 4.0 License
|
Updated Tue Nov 26 2024

Simple and fast to make sliding bevel.

30 min
Easy

9

Tools

Files Included (3)

  • leftside.svg

    12 kB
  • rightside.svg

    11 kB
  • sword and inlay.svg

    10 kB

Materials

wood (i used beech)

2pc. 220x40x6,5mm

1pc. 380x40x6,5mm

1pc. wingnut m6

1 pc. carriage bolt M6x30mm

1 pc. washer

Tools

Origin

Workstation

3mm spiral router bit

0,8mm spiral router bit (optional)

19,4x11mm coving bit

Instructions

Tape the wooden pieces to workstation, add a grid and cut the pieces with the 3mm bit. The files of the left and right side have a line to cut on. Use the coving bit with 3mm depth to add a hollow notch. Before assembly be sure the rectangular hole for the carriage bolt has nearly no round corners. cut with the smallest bit you have (for example 0,8mm) or use a chisel to clean the edges. Just add a little it of glue to the inlay on both sides, screw the sword in and clamp the inlay in between the sides.


Made by Shaper Tools

© ShaperHub & Shaper Tools, Inc. all rights reserved