Simple viennese braid lampshade

Instructions

Place the file twice on the pieces of plywood. Cut the second ring from the outside with a depth of 8 mm. Cut all the holes. Control the diameter of your lamp socket! Cut the outline of the shade. Cut the second ring of the second piece of plywood, with a depth of 8mm, like the first. Add a offset to the outer contour of 13mm to the inside and cut it in full depth, so you get a big hole. Cut the outer contour without an offset. Cut the viennese braid to length, so you generate an overlap of 1,5cm. Put the pieces together by adding glue in the pocket. Glue two pieces of wood over the overlap.