iPhone and Apple Watch MagSafe-stand
iPhone and Apple Watch MagSafe-stand with concealed wires.
72
Electronics
Files Included (8)
cable clip.svg
1 kBfaceplate back.svg
12 kBfaceplate front.svg
13 kBfoot downside.svg
9 kBfoot extension.svg
4 kBfoot upside.svg
9 kBMagSafe Stand.pdf
208 kBstand back.svg
10 kB
Materials
Either one bigger piece of 9mm thick wood or
9 mm thick pieces of wood:
144 x 75 mm for the faceplate
55 x 55 mm for the leg (stand back)
66,6 x 55 mm for the foot
9 x 9 x 124 mm for the foot extension (optionally use a metal plate as foot extension)
2mm thick piece of wood for the hinge
35 x 20 mm for the cable clip
Some kind of screw to keep the cable clip in place.
Tools
Shaper Origin
Shaper Workstation
3 mm cutting bit
6 mm cutting bit
Optinally:
16 mm cutting bit
table saw
Instructions
Take a look at the PDF and Instagram: https://www.instagram.com/reel/Ct9aJfdo1Is/?utm_source=ig_web_copy_link&igshid=MzRlODBiNWFlZA== Cut these pieces: cable clip, faceplate front, foot upside, stand back, foot extension Flip the faceplate and the foot downside, apply a grid and the files. Cut the pieces. Use the table saw to add the angle. Foot to leg with 45°. Faceplate to leg with 27,5°. Countersink the cable clip for your screw. I used a threaded bolt and lowered the nut in the foot. Glue the pieces together, using tape.