Apple Tree Outline

By Tape_butcher | Created May 9th, 2020 | Published May 9th, 2020 | Updated May 9th, 2020

uploaded project image
project image thumbnail
I made this apple tree pattern based on an antique stamped wallpaper in my home. Here you see it on the large snack box from CharlieM https://hub.shapertools.com/creators/59d307ab735c740010ba2999/shares/5e6da92ace53b3000f11a958

10 min

Easy

1

Category

Decor

Files included (1)
NameSize
Apple Tree.svg
18 kB

The svg is set to pocket mode and can be made into a stamp. However, it is also very nice as a simple cut on line or cut outside, but the angles get pretty tight for an 1/8" bit or larger. Here it is cut with an engraving bit at 0.025" depth of cut and on the large snack box from CharlieM--great project Charlie! With care and a small bit, I plan on using this pattern as an inlay on a banjo. We'll see... Here's CharlieM's hub link: https://hub.shapertools.com/creators/59d307ab735c740010ba2999/shares/5e6da92ace53b3000f11a958

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license