Sequence Board Game
22" x 22" Sequence Board Game Includes pockets for chip holders Game pictured used 3/4" plywood with pocketed chip holders (1/2") with solid walnut rails. This took many many hours to design. Hope you enjoy! Jarrett & Eryn J-Man Carpentry LTD Saskatoon, SK Instagram & Facebook @jmancarpentry www.jmancarpentry.com
5
Games
Files Included (1)
SequenceBoardGame.svg
72 kB
Materials
3/4" sheet of nice plywood
Optional: rails 1 1/2" tall x 1 1/2" wide x 24" long cut to size
Glue
Brad Nails
Wood Finish
Tools
Shaper Origin
Table Saw
Mitre Saw
Brad Nailer
Sander & sand paper
Instructions
Start engraving your game board first (engraving bit) - test depths to ensure you have good visibility Then pocket out holes 1/2" deep with 1/4" bit Then cut out board with 1/4" bit Sand board lightly (starting at 120 grit up to 320 grit) Optional: cut solid wood rails to cover plywood edge using table saw & mitre saw Attach using glue & brad nailer Wait for glue to dry then sand rails Apply finish