Dog Bowl Stand
For Holding Dog bowls up off the ground at a 12" height
50 min
Easy
32
Pets
Files Included (3)
Leg (Need 2).svg
1 kBPawSized.svg
21 kBTop.svg
2 kB
Materials
12mm (1/2) Baltic Birch the stringer is 2.5"x21.5" in length
Cut the top and stringer with a table saw, then use the shaper for the detail work. The legs can be done on a table saw or with the Shaper. Optionally include a paw print in the top.
Tools
Instructions
I cut the legs with the 1/4" bit 0.02" offset 1/4" for first pass, 11mm for second pass. Then I used 1/8" bit to do the final 12mm pass at 0.0" offset on the outside (Love that you can mix units) The top I cut too size on the table saw and then positioned it to do the tenons and circles with the shaper. Stringer was done on a table saw and a band saw, I made it 2.5" across, and the tenons are 1.5"