Propeller Table
A table designed around propellers Top is veneer & inlays Legs with propeller shapes
19
Furniture
Files Included (5)
Propeller table 1 overview.svg
165 kBPropeller table 2 Upper table.svg
3 kBPropeller table 3 Lower table.svg
3 kBPropeller table 4 leg contour edge.svg
3 kBPropeller table 5 leg contour face.svg
3 kB
Materials
Wood for legs - I used walnut
3/4 MDF for top
Veneers
Tools
Shaper Origin, Workstation
Spokeshave
Veneer press
Instructions
Project overview .svg included in photos Used Shaper O to cut MDF circle to size of table desired Applied veneer to top and bottom of table top Used Shaper O to cut out pockets for propeller inlay pieces and mortises for legs Cut leg to included .svg - used to make templates --- drew on legs and cut on bandsaw - Could have made these cuts with Shaper O Cut tenons into top of legs with Shaper - fit into top mortises Mortises then covered with propeller laminate pieces Sculped legs with spokeshave Cut grooves to bridle joint into lower table which was also cut with Shaper As propellers extended beyond table edge (just for fun), made edge pieces under protruding laminate Wrapped edge with dyed veneer Sanded and finished with Osmo Link to more photos: https://photos.app.goo.gl/4Ba367uQGZwcEsu9A