Router Plate for MFT

By AggieDadFM | Created March 19th, 2020 | Published March 19th, 2020 | Updated March 19th, 2020

uploaded project image
project image thumbnail
For those looking for a cheap router plate for their MFT, this is the design I used. In this project, I include the link to the router plate and cut-out template.

20 min

Easy

2

Category

Jigs & Fixtures

Files included (1)
NameSize
MK Router Cutout plate.svg
19 kB

- MFT table or Router table
- Shaper Origin - Router Plate from Amazon - Magnets (optional)
For this project I used a cheap router plate I found on Amazon. The plate can be found here: https://www.amazon.com/gp/product/B000VS8B0M/ Use the cut-out template to cut the plate. Hint: I started with a slight offset to insure the plate fit very snug. Just start with an offset and work your way out until it fits. additionally, this plan has cut-outs for magnets in case you choose to attach your plate using them (which I did).

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license