Enso Joinery by Jonas Winkler

By Jonas1 | Created June 13th, 2020 | Published June 13th, 2020 | Updated June 13th, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
Enso is an award winning joinery technique that enables you to reuse very small pieces of wood. It mainly is a longitudinal wood connection, but with a little creativity it can also be used to angled joints. Feel free to use it as much as you like it. No matter if its for your hobby or your business. Just make sure to tag me with #jonasenso! :)

Easy

35

Category

Joinery

Files included (2)
NameSize
ENSO Joint Female .svg
850 B
ENSO Joint Male.svg
920 B

The joint is usable with every square stock. I used 50x50mm for this project and used 30x30mm a lot in the past.
Shaper Origin 6mm bit
Make sure to prepare your stock very well. It should be super square, otherwise the fit will be not ideal. Using the workstation to hold the pieces is the most convenient way I found. Besides that, just let Origin do its job! :)

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license