birdfeederhouse

By Sander | Created May 24th, 2020 | Published May 24th, 2020 | Updated May 24th, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
bird feeder house, can be hung or mounted on a pole

40 min

Easy

7

Category

Pets

Files included (1)
NameSize
voederhuisje shaper.svg
11 kB

12 mm birch plywood 720 x 350 mm
Shaper origin saw table (air) tacker
The file only concerns the 2 milled sides, other parts according to your own design. I myself have set the scaling to 350 mm high. the bottom at 260 x 260mm and the roof parts 320 x 255mm. the raised edges 240 x 35 mm so that they do not adhere to the milled sides. this to drain any rainwater at the 4 corners have fun duplicating. Greetings from Holland

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license