ExploreMy ProjectsMy Origin Files

    Metric Vertical Workstation

    By Friedrich | Created December 23rd, 2019 | Published December 23rd, 2019 | Updated December 23rd, 2019

    uploaded project imageuploaded project image
    project image thumbnailproject image thumbnail
    project image thumbnailproject image thumbnail
    This Metric Vertical Workstation makes it easy to align, clamp and cut all of your end joinery projects. A perfect solution for the metric shaper world.

    2 hr

    Advanced

    25

    Category

    Jigs & Fixtures

    Files included (1)
    NameSize
    191223_Metric Vertical Workstation.svg
    		41 kB
    18 mm Plywood 600 x 1150 mm 2 x T-Track 400 mm + Clamps 3 x Wooden Dowels 8 mm 5 x Countersunk Screws 4,5 x 50 mm 6 x Countersunk Screws 3,5 x 16 mm
    Shaper Origin 6 mm Up-Cut Bit Rubber Mallet Screwdriver
    Basically follow the instructions from the Vertical Workstation (https://www.shapertools.com/hub/creators/5b437481a92ce901517c0655/shares/59eecd49a92ce9014344b5ce) T-Track 400 mm + clamps 👉🏼 (https://www.amazon.de/gp/product/B07NYQSDHS/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1)

    This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license