Lightweight x Dynamic x Stackable My mom said: Son I need a stool. So here we are. You can use it as stool or side table. Because of the tripod its very stable. You need: Seat: 380 x 380 x 16mm (Final) Legs: 535 x 119 x 18mm (Final, 2 pieces mirrored) Enjoy! Private use only, commercial use is prohibited. If you u need anything text me at Insta: hm0196
235
Furniture
Beinzapfen - Tenon right leg -Meditri 4.0.svg
Beinzapfen innen - Tenon left leg - Meditri 4.0.svg
Frässchablone - Template leg - Meditri4.0.svg
Hobelschablone oben - Plane Template- Meditri4.0.pdf
Sitzfläche - Seat- Meditri4.0.svg
You need:
Seat: 380 x 380 x 16mm (Final)
Legs: 535 x 119 x 16mm (Final, 2 pieces mirrored)
I did it in ash.
Some MDF for templates
Shaper Origin
Thicknesser
Router
Start with the seat. The angle of the legs is 30 degree. For the legs I used a template in MDF, so you can draw the contour saw it out and do a flush milling (picture 4) Afterwards mill the tenon upside. Use the workstation. Last step is to use the thicknesser and two templates (one for left and one for right side) to get the right angle (picture 3). Glue the legs together. Now u can glue them into the seat plate. It s a first try, so its not perfect yet. You may need to improve something, so do a first try if you build more.
Made by Shaper Tools
© ShaperHub & Shaper Tools, Inc. all rights reserved