Track Saw Guide Rail Storage vertical/horizontal

By PatrickS | Created October 6th, 2020 | Published October 6th, 2020 | Updated October 6th, 2020

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
Get your track saw guide rails out of the way. In my case I hang them vertically onto my workshop (garage) door. They work both horizontally and vertically and it's easy to take out the rails while they are safe against accidentally dropping on my head.

30 min

Easy

8

Category

Jigs & Fixtures

Files included (2)
NameSize
Halterung Festool Schienen.svg
4 kB
Halterung Festool Schienen.afdesign
18 kB

18mm plywood scraps ~ 240x180mm
Shaper Origin 6mm Cutter
1. Cut 2. Paint (optional ;) ), 3. mount to the wall or ceiling, 4. enjoy. I designed the fixture to hold Festool tracks, but it should work with others as well. The Afdesign-File is included should you want to expand or adapt the fixture. The rubber lip does not have contact to the fixture, so it's well protected.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license