Marble maze
This is a coaster-sized maze. The paths are 6mm wide and deep and provide a lot of clearance for a 4mm ball bearing I had on hand. Use 1/8" cutter with 2 passes to reach the desired depth. There are two pockets that serve as start / finish locations. The clear cover was cut and drilled without Shaper, so there are no holes provided in the SVG.
30 min
Easy
43
Toys
Files Included (1)
maze3.svg
7 kB
Materials
- 10cm x 10cm coaster with a thickness of at least 8mm
- 4mm metal sphere (e.g. from a ball bearing)
- acrylic or polycarbonate cover
- fasteners (e.g. #10 1/2")