Four-drill rack

By Misternick808 | Created December 3rd, 2019 | Published December 3rd, 2019 | Updated December 3rd, 2019

uploaded project image
project image thumbnail
project image thumbnail
Used this as my very first project on the SO. I have four drills so I expanded the original drill rack design. Also added dog ears on the side supports so you don't need to round over the bottom of the back plate. Saves you the hassle of setting up another router. You still need the ABS cut out template from the original design

1 hr





Files included (5)
drill rack back.svg
1 kB
Drill rack Front.svg
4 kB

1/2 " plywood 3" ABS pipe Wood glue Double sided tape
Shaper Clamps Patience
Same instructions as original Shaper designed drill rack. No need to round over the bottom of the back plate. Still need to get template to cut the ABS pipe from original design. Have fun. Aloha

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license