Jump a peg game

By Dennis12 | Created December 8th, 2019 | Published December 8th, 2019 | Updated December 11th, 2019

uploaded project imageuploaded project image
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
project image thumbnailproject image thumbnail
Jump a peg game. I made holes a bit smaller for nails instead of golf tees.

30 min

Easy

7

Category

Games

Files included (1)
NameSize
jump a peg.svg
1 kB

8” x 8” walnut board Diamond-Head Forged Nails from Clouterie Rivierre Wax or oil finish
Shaper origin Block plane
Cut inside holes first and use offset to get nice fit for your nails. Then cut outside of triangle in 3 passes. Clean up edges with block plane and chamfer edges. Finish with wax. Note I found if you make the holes a outside cut with a -.11 offset it makes a perfect nail hole when using 1/8” bit. You have to go through and change them all at beginning with in tool options. Nails are Diamond-Head Forged Nails from Clouterie Rivierre available at Lee Valley.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license