Small Christmas Tree
By Roy3|BY-NC-SA 4.0 License|Updated November 21st, 2020
Borrowed design from Peter52s Christmas ornaments. Made it larger and then made file for base(minus the star) and one for top. Cut slots using onboard rectangle. Pattern was not symmetrical so backs are not perfect. For perfection, mirror the backs before engraving.
20 min
Intermediate
23
Files included (2)
Scrap plywood/ Mine is about 8" tall.
Scrap for base.
Stain, finish of choice.
Shaper.
Design is not symmetrical. Mirror the design for the backs if you want it perfect.