Sys1 Foam Insert Individual Parts
This contains each individual part for the Shaper Workstation so you can create your own custom foam inserts for your Sys1 For additional instructions: https://hub.shapertools.com/creators/59b9b947291ebbfa71254b56/shares/5e938182254f6b000fe65982
200
Object Outlines
Files Included (14)
7mm Crescent Wrench (A) Foam Insert.svg
12 kB7mm Crescent Wrench (B) Foam Insert.svg
11 kBAllen Wrench Foam Insert.svg
4 kBAngle Fence Foam Insert.svg
4 kBAngle Fence Screw Foam Insert.svg
4 kBCollet Foam Insert.svg
3 kBEndmill (10) Foam Insert.svg
4 kBEndmill (5) Foam Insert.svg
3 kBHold Down Clamp (left facing) Foam Insert.svg
7 kBHold Down Clamp (right facing) Foam Insert.svg
7 kBShaper Tape (Double) Foam Insert.svg
2 kBShaper Tape (Single) Foam Insert.svg
2 kBShelf Support (left facing) Foam Insert.svg
4 kBShelf Support (right facing) Foam Insert.svg
4 kB
Materials
Tools
Instructions
Project contains: Angle Fence Screw Angle Fence Shelf Support (left and right facing) Endmill (5 and 10) Allen Wrench Crescent Wrench (A and B, There are multiple wrench types, so make sure to test cut before find which one you have) Shaper Tape (single and double roll) Collet Hold Down Clamps (right and left facing)