Wall Mirror
Give tambour a try with this wall-hanging mirror. With abundant fine detail, including gently arched surfaces and a curved drawer box, this build is sure to improve your design sense and challenge your woodworking skill.
30
Decor
Files Included (19)
Case - Bottom - Rev 1.svg
10 kBCase - Bottom Curve - Rev 1.svg
809 BCase - Divider - Rev 1.svg
2 kBCase - Side - Rev 1.svg
5 kBCase - Top - Rev 1.svg
8 kBDrawer - Bottom - Rev A.svg
8 kBDrawer - Curve A - Rev A.svg
16 kBDrawer - Curve B - Rev A.svg
6 kBDrawer - Curve C - Rev A.svg
6 kBDrawer - Curve D - Rev A.svg
6 kBDrawer - Front - Rev 1.svg
840 BFrame - Bottom Rail - Rev 1.svg
2 kBFrame - Center Bottom Rail - Rev 1.svg
1 kBFrame - Center Top Rail - Rev 1.svg
986 BFrame - Mirror - Rev 1.svg
875 BFrame - Panel - Rev 1.svg
906 BFrame - Stile - Rev 1.svg
5 kBFrame - Top Rail - Rev 1.svg
1 kBWall Mirror Drawings.pdf
2 MB
Materials
3/16" maple dowels
Wood glue
Fabric tambour backing
Mirror (glass recommended)
Brusso L-23 offset pivot hinges
Brass
Veneer for tambour and drawer front (optional)
See Drawings PDF for hardwood cut list
Tools
Shaper Origin
Shaper Workstation
8mm x 35mm Up-Spiral Finishing Bit
8mm Collet
1/4” X 3/4” Up-Spiral O-flute Router Bit
1/4” Collet
Jointer
Planer
Table Saw
Bandsaw
Handplane
Chisel
Clamps
Glass Cutter (optional)
Instructions
Follow along with the linked Masterclass for detailed tambour instructions: https://www.shapertools.com/masterclass/philip-morley Download the Wall Mirror Drawings PDF for detailed plans and notes.