Balance Board
Design & Make your own Balance Board. It's just a fun piece to have, for long Homeoffice days or in between Homeschooling. Just get on the board, close your eyes and image to ride a wave.
25
Other
Files Included (2)
KeepTheBalance.svg
14 kBTemplateBalanceBoard.svg
611 B
Materials
for the Jig Poplar Plywood 10mm
2 x 400mm x 900mm (top and bottom)
1 x 900mm
for the Board Pine Plywood 6mm
2x 400mm x 900mm
Corkroll 10cm x 45 cm
Tools
Shaper Origin + 6mm cutter + engraving bit traditional router with a bearing router bit
Instructions
Template: 1. Cut out five of the curved template with the 6mm cutter. 2. Cut in some grooves in top and bottom (I did this with the circular saw but you can also use the 6mm router bit with the Shaper Origin). 3. Glue the template together. Balance Board: 1. Engrave the letters and sign with an engraving bit (30degree) 0,5mm deep. Use the S on the outside of the board for a test. 2. Use a 6mm cutter to cut out the shape step by step. 3. The second piece for the board, you have to cut bigger. So you have enough left over to glue it together on the curved mold. 4. After glueing, you just have to flush it with a bearing router bit and a traditional router 5. Finally I used a small rounding cutter to soften the edges.