Star_Inlay / Windrose
Materials
Depending on the size of your Project
- Maple
- Walnut
Tools
Shaper Origin
Instructions
Cut one "Star_Inlay_Parts.svg" with light and one with dark wood. Insert Offset when doing the pocket cut (I needed 0.2 mm).
Depending on the size of your Project
- Maple
- Walnut
Shaper Origin
Cut one "Star_Inlay_Parts.svg" with light and one with dark wood. Insert Offset when doing the pocket cut (I needed 0.2 mm).
Made by Shaper Tools
© ShaperHub & Shaper Tools, Inc. all rights reserved