Knot

By SmoothOperator | Created May 14th, 2020 | Published May 14th, 2020 | Updated May 15th, 2020

uploaded project image
project image thumbnail
project image thumbnail
project image thumbnail
A wooden knot puzzle

30 min

Easy

8

Category

Shaper Workstation

Files included (1)
NameSize
Knot.svg
12 kB

-120 mm x 30 mm x 30 mm whatever material you can mill with Origin...
-Origin -(Workstation)
- A template can be milled in a plate more than 30 mm thick - Two parts each have to be turned 90° and be milled again - An offset of 0.05 mm is recommended

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license