Wavy Drawer Front
Used this design on a hallway table drawer front because I had continuous grain around the entire apron and did not want to disrupt that by cutting out the drawer front with the bandsaw. I would highly recommend using a 1/16th" diameter cutter because the 1/8th left too much of a gap. Do the initial 1 or two passes with the Origin then finish with a Scroll Saw or bandsaw.
4
Cabinetry
Files Included (1)
drawer front1.svg
2 kB
Materials
This is 5/8" cherry.
Tools
SHAPER ORIGIN
Instructions
Used this design on a hallway table drawer front because I had continuous grain around the entire apron and did not want to disrupt that by cutting out the drawer front with the bandsaw. I would highly recommend using a 1/16th" diameter cutter because the 1/8th left too much of a gap. Do the initial 1 or two passes with the Origin then finish with a Scroll Saw or bandsaw.