MFT Table Slide Stop

By GlennR | Created May 9th, 2019 | Published May 9th, 2019

uploaded project image
project image thumbnail
project image thumbnail
project image thumbnail
project image thumbnail
A simple sliding stop to be used for work holding on an MFT style table with 20mm bench dogs.

10 min




Jigs & Fixtures

Files included (1)
MFT Sliding Stop.svg
1 kB

Any material suitable for a slide stop, including MDF, Baltic Birch Plywood, Aluminum or Phenolic.
Shaper Origin
This file includes a 1/4" slot and 20 mm pocket, however, in most wood thinner than 3/4" only the 1/4" slot is necessary. In 3/4" material (or thicker) the 20 mm slot will allow the top of a 20 mm dog to ride in the channel. Simply attach a bench dog (rail dog) and knob to securely lock the sliding stop and tighten. A rail dog with a 1/4"-20 tapped thread in one end is needed.

This project is licensed under the Creative Commons Attribution - NonCommerical - Share - Alike license