Soldering station Systainer Insert
M137 sys3 insert for an old Soldering Station
1
Systainer Inserts
Files Included (8)
iron systainer v10.f3d
4 MBsystainer_printout_layout_bottom_no_pocket.svg
20 kBsystainer_printout_layout_bottom.svg
25 kBsystainer_printout_layout_top.svg
185 kBsystainer_solder_cable.svg
179 kBsystainer_solder_final.svg
6 kBsystainer_solder_offset_under.svg
13 kBsystainer_solder_under.svg
12 kB
Materials
Cross Linked Polyethylene - 4LB Charcoal Thickness: 2" (https://www.foambymail.com/product/cross-linked-polyethylene-foam-4lb.html)
2'' painter tape
Tools
Shaper Origin
Small Snap Knife for removing foam
Track Saw for final cuts
8mmx35mm bit (https://www.shapertools.com/en-us/store/product/8-mm-x-35-mm-up-spiral-flat-router-bit)
Instructions
Systainer insert for my old soldering station (Aoyue 937). Model from grabcad were used: - systainer 3 (https://grabcad.com/library/festool-systainer3-1) The pocket for the interrupter and the iron older were cut too small, fixed in the final .svg and the .f3d. The older for the iron is 3d printed, defined in the incuded .f3d. Cut in parallel with another systainer insert (https://hub.shapertools.com/creators/5bcf493945760d0017441fce/shares/6805701b0b67a8e5ff550109) see its instructions.