anti-slip covering for support rail

By gwendal
|
BY-NC-SA 4.0 License
|
Updated Tue Oct 22 2024

Copy of the Ruwi Support rail with anti-slip covering for assembly table (https://ruwi.de/en/shop/lifting-tables/accessories-lift-table/support-rail). Instructions are similar to similar project at https://youtu.be/yWqyXM6XQeY?si=ZTxqjFgp4q9-S3ZB

20 min
Easy

8

Tools

Files Included (1)

  • TTrackHoldCover.svg

    2 kB

Materials

⏺1/2'' 4ft x 32mm wood

⏺3x Button Head Hex Drive Screw, M8 x 1.25 mm Thread, 18 mm Long (https://www.mcmaster.com/91239A420)

⏺3x T-Slotted Framing, End-Feed Single Nut, M8 Thread, for 40 mm Single Rail (https://www.mcmaster.com/5537T688)

⏺1 3''1/4 x 10ft rool of High Density Foam Weather Stripping Door Seal Strip (https://www.amazon.com/dp/B0BYBDP4BM?ref=ppx_yo2ov_dt_b_product_details&th=1)

Tools

⏺Shaper Origin

⏺Cutter

⏺Flush Trim bit and router

Instructions

Each piece has 3 holes to secure the covering to a 40mm aluminum extrusion. The feet to connect to the MFT table are at https://www.printables.com/model/599361-support-rail-with-anti-slip-covering-for-mft-table . The strip of foam works, but is a pain to cut longitudinally. Using a flush trim bit help cleanup the cuts. 4 pieces allow cutting 4x8 on 2 MFT tables.


Made by Shaper Tools

© ShaperHub & Shaper Tools, Inc. all rights reserved