Trim router table add-on to Workstation
Table to use on top of the workstation to trim and for small templates. The base connector has an indent to be stored on french cleats.
20
Shaper Workstation
Files Included (3)
table_router_bottom3.svg
3 kBtable_router_top3.svg
5 kBVAC SYS att_simple v49.f3d
652 kB
Materials
3/4'' melanine covered plywood
2* M8 bolt and 40mm Knob (https://www.mcmaster.com/catalog/129/2540/2907T64)
4 * Flat Head Screws, M4 x 0.7 mm Thread, 16 mm Long
(https://www.mcmaster.com/catalog/129/3434/91420A226)
6 * Flat wood screws #8 3/4'' long
3d printed connectors (https://www.printables.com/model/524171-shaper-worstation-trim-router-table-connectors)
Tools
Shaper Origin
Track saw for straight lines (optional)
3d printer
Instructions
Simple cut, 2 faces: first the bottom for - the outline and the route base (1/4'' bit) - the holes for the connectors screws (1/16'' bit, engraving), 2 in the front, one in the back. then the top for - the main hole - the mounting screw holes (1/8'' bit and 45 degree bit for counter sink, set as the hole size) - the magnet holes (1/8'' bit)