Systainer3 template
Sys3 insert Blank insert svgs and svgs for a simple insert included as example
25
Systainer Inserts
Files Included (18)
bottom_12mm.svg
6 kBbottom_14mm.svg
6 kBbottom_22mm.svg
6 kBbottom_30mm.svg
6 kBbottom_4mm.svg
5 kBbottom.svg
9 kBfuji_gun_bottom_single_12mm.svg
8 kBfuji_gun_bottom_single_14mm.svg
8 kBfuji_gun_bottom_single_22mm.svg
8 kBfuji_gun_bottom_single_28mm.svg
8 kBfuji_gun_bottom_single_4mm.svg
7 kBfuji_gun_bottom_single_simple.svg
9 kBfuji_gun_bottom_single.svg
7 kBsystainer_bottom_relief_face.svg
3 kBsystainer_bottom_relief.svg
10 kBsystainer3 v13.f3d
617 kBsystainer3.f3d
575 kBtop.svg
3 kB
Materials
foam (30mm)
Tools
Instructions
Based on the systainer insert. Given the side is more convoluted, post process the svg from Fusion 360 to include an anchor cut at different height (4, 12, 14, 22 and whole depth (30mm) - starting from the bottom). The spines at the bottom are 7mm deep. To customize, either use the fustion360 file or an SVG editor to alter "top.svg". The anchor allows cutting both sides. The foam used for the Fuji paint gun is only 28mm deep, it does not fill the whole bottom. Note: there are some mistakes in the relief dimensions in the original set of files. It is fine for foam, but not for plywood. The set "systainer_bottom_relief..." fixes the issue, and a new .f3d file (v13) has been added to reflect the changes.
